High flow high pressure pump

High flow high pressure pump Type BMS

The BMS mobile pump system enables the testing of objects at different locations in a workshop or at field locations. The wheels or forklift pockets make the BMS much easier to move in comparison to standard workshop units.

This high flow / high pressure system enables adequate testing and adapts ideally to your specific requirements for testing large volumes of objects at high pressure. The BMS is generally equipped with two air driven pumps, thus accelerating your operational process.

To test objects even quicker, the standard high flow high pressure pump integrated into the BMS can be expanded with a high flow low pressure air driven pump. 

Benefits of the BMS include:

  • Mobile pressure unit
  • Robust design
  • Suitable for pressurizing with oil, water or an emulsion of both
  • Modular design with numerous options


Practical usage

Like most Resato systems, the BMS works with pressurization, isolating pressure and bleeding. The standard pressure gauge allows the pressure readout on the test unit. With the optional pressure chart recorder, pressure outputs can be visualized. The archiving of test results is simplified with the optional computer recorder that is connected to the unit using a USB connection.

As a result, the pressurization process can be adapted to its preferred course. Once the desired output pressure is reached, the Resato air driven pump will automatically cease to increase pressure. This reduces energy consumption and reduces noise levels at the worksite.

Another benefit of this air driven pump is its ability to adjust the pressurizing process, both during the build-up and control phase. 

Technical specification

Feature Technical specification
Max. operating pressure 4,200 bar / 60,000 psi
Max. flow 50 l/min
Materials All critical components e.g. bleed valve, gauges, and wetted pump parts are made from stainless steel or other non-corrosive materials. The frame is made from stainless steel.
Test gauge Class 1.0% F.S., 100mm ø housing (4”), entirely made from stainless steel  

Modular options

  • Mechanical chart recorder
  • PC data acquisition and recording system
  • Multiple pumps
  • Lid to cover the instruments
  • Engraved panel
  • Isolation valve
  • Wheels
  • Lifting pads
  • Forklift pockets
  • Float cock (if reservoir is present)



From our high pressure expert

Sander Vroling

"We see ourselves as high pressure doctors and not as sellers."

Sander Vroling - Sales director
Contact our expert