ACM Cutting Table Getting more than the best quality cut
The cutting table comprises a precision-built steel construction embodying linear direct-drive motors on each of the two main axes. To achieve the required precision, the bridge and self-propelled carriage plate are powered by two direct-drive linear motors on each side. This results in a speed range from 1 to 30.000 mm/min.
Use of these components and construction enables the installation to achieve positioning accuracy and repetition accuracy of ± 50µm (at 20 °C) accross the machine's full range. The guideways and drives are suitably protected from water and abrasive through bellows and protective stainless steel plating.
Direct-drive linear motors guarantee:
- Better cutting behavior and absolute repetition accuracy (without needing to back-up) of the cutting head compared to traditional mechanical transitions using spindle, pinion, rack and gears
- Low maintenance as a result of the non-contact principle, combined with greatly reduced wear parts consumption
- Wide range of cutting speed and jogging speed, adjustable from very low to very high
- Fast response enables cutting speed to be rapidly changed
Due to automatic control of the PJ high pressure pump and the process parameters, permanent supervision during the cutting process is not required. Resato water jets are equipped with an automated stop function that trips once a cutting task is completed. This means that all units will be acting in standby mode or will shut down and almost no energy is required.
ACM Table Range
|Net cutting range||Machine type|
|in 2D||1 cutting head||2 cutting heads|
|2020 x 1520 mm||ACM 2015-1||ACM 2015-2|
2020 x 4020 mm
|ACM 2040-1||ACM 2040-2|
|2020 x 6020 mm||ACM 2060-1||ACM 2060-2|
|3020 x 1520 mm||ACM 3015-1||ACM 3015-2|
|3020 x 3020 mm||ACM 3030-1||ACM 3030-2|
|3020 x 4020 mm||ACM 3040-1||ACM 3040-2|
|3020 x 6020 mm||ACM 3060-1||ACM 3060-2|
|3020 x 8020 mm||ACM 3080-1||ACM 3080-2|
|3020 x 10020 mm||ACM 30100-1||ACM 30100-2|
Different machine types or more cutting heads than two can be provided on special request.