ACM Cutting Table Options

ACM Cutting Table Options Are these options suitable for you?

UWC

A semi-automatic water level control system can be installed within the catcher to permit faster water level adjustment. Water level is set and controlled via the HMI. Using the semi-automatic water level control, parts can be cut submerged, reducing both noise and water splash. The rear of the catcher is fitted with an "air clock", operated from the operator console. The water level can be roughly set from 0 mm to about 50 mm from the cutting bed.

Cascade filter

The cascade filter is positioned between the overflow and drain of the catcher and is intended to reduce levels in the drain water of material cuttings and abrasive.

Remote control

The remote control unit allows limited operation of the machine away from the console and the movements of the cutting head to be controlled within the machine's safety zone.

The handheld control unit is intended to allow the safe movement of the cutting head into the correct position, for instance to set a starting position that can then be adopted by the operator console. Once the cutting head is positioned, the machine can be operated from the operator console in order to ensure a safe working environment at all times. 

Our waterjet cutting technology expert

Waterjet Experts

"What has changed for you, due to the crisis, and what are your requests for a cutting machine?"

Marc Epping - Sales Director
Contact our expert

Related products

ACM Waterjet cutting machine

ACM Waterjet cutting machine

The cutting table comprises a precision-built steel construction embodying linear direct-drive motors on each of the...
View product »

Flex-Zone

Flex-Zone

While the table previously was unreachable during cutting, with the Flex-Zone it now can freely and safely be loaded...
View product »