Abrasive continuous supply

Abrasive continuous supply A time-saving and efficient continuous abrasive flow

The abrasive continuous supply system provides an abrasive flow to cutting machines without stopping the cutting process while refilling the abrasive pressure vessel.

The vessel contains an automatic controlled pressure system to fill-up a small pressure vessel to transport the abrasive to the cutting machine. A large abrasive silo stores the abrasive and can be replenished at any time without interfering the cutting process.

On request, the ABR-CS with control cabinet can supply abrasive up to three machines. 


  • Continuous abrasive flow
  • Able to refill abrasive during the cutting process
  • Monitoring abrasive level


Silo Low-Level message

To detect sufficient stored abrasive in the storage silo, a second sensor will signal the cutting machine to report a 'Silo Low-Level' message. This message will be the trigger to replenish the storage silo before running completely out of abrasive.

Technical specification

Replenishment Open cover and empty big bag in silo
Total capacity 2300 kg
Refill capacity 2000 kg (1000 L)
Accessibility Easy and ergonomic access with use of step-up
Minimum ceiling height 4 m
Empty weight 325 kg
Maximum weight 2625 kg
Floor load 4 supports Ø 120 mm, 6563 N/support, 0.6 N/mm²
WxDxH 1225 mm x 1225 mm x 1880 mm
Surrounding free space Back 200 mm, left or right 600 mm, front is fork truck dependent

Our waterjet cutting technology expert

Waterjet Experts

"What has changed for you, due to the crisis, and what are your requests for a cutting machine?"

Francois Hemmerlin - Sales Director
Contact our expert

Related Products

Abrasive vessels

Abrasive vessels

Abrasive is transported pneumatically from the vessel to the feeder under 4 to 5 bar air pressure
View product »

Abrasive Removal System (RS3)

Abrasive Removal System (RS3)

The removal system’s purpose is to remove abrasive and waste material from the waterjet catcher. This system reduces...
View product »